Get organised with these great personalised vinyl labels suitable for water bottles, gifts, jars, lunch boxes, name stickers.
They can be used on any smooth hard surface such as glass, plastic, paper, walls and wood. (Not suitable for fabric)

They are easy to apply and are permanent (until you want to remove them) and waterproof. 
Available in lovely colours including pastels, rainbow and glitter.

If you are going to use your vinyl on mugs/glasses please note these are not intended for the dish washer. Hand wash only. Not suitable for outdoor use. Not suitable for the microwave. And if you use them on walls please be aware that they are permanent and may damage paint or wallpaper if you try to remove them.

Order by the length required. Each font will give a slightly different height. 

Sizes are as follows (width):
• 2 inches (5cm) 
• 3 inches (7.5cm)
• 4 inches (10cm)
• 5 inches (12.5cm)
• 6 inches (15cm)
• 7 inches (17.5cm)
• 8 inches (20cm)

If you are ordering a sticker with more than one word you need to have 2 inches per word and enough for a gap. So for instance Sophie Moore would require a 5 inch sticker. 2, 3 and 4 inch vinyls are one word vinyls,

Maximum 12 letters per word. 

| PLEASE NOTE |

Words all naturally have different lengths, shorter words such as “Ava” will be different in height to “Charlotte” if both selected as the same length. If you would like the words to have the same height please message me with a custom order, and I will be happy to help. 

If you are ordering single words in a 7 or 8" length please be aware that this would be 4 inches in height or taller. If you would like specific widths and heights please do not hesitate to message me.

Please message me if you are looking to get larger vinyls and I will be happy to help. 
__________________________________

To apply the vinyl:

1. Rub a squeegee or credit card firmly across the sticker through the clear transfer tape to prepare it for application. This ensures the sticker will cling to the transfer tape and removes any air bubbles that may have formed.

2. Ensure the surface you are applying to is clean and dry. Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 1. 

3.Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.

4. Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 3.